How to Use the Leopard 40K Refillable: Official Refillable Pod Guide

Step 1: Remove the device from the pouch, peel off the insulating sticker on the bottom of the device, and pull off the silicone plug.

1. Take the Leopard 40K Refillable out of its protective pouch packaging.
2. Locate the insulating sticker on the bottom of the device and peel it off completely to activate the battery.
3. Pull off the silicone plug covering the mouthpiece to remove shipping protection.

Step 2: Open the top silicone plug, fill the tank with 10mL e-liquid, wait 2 minutes, and then start vaping.

1. Open the silicone plug on the top of the device to expose the filling hole.
2. Carefully inject 10mL of your preferred e-liquid into the tank (do not overfill to prevent leaks).
3. Close the top silicone plug firmly to seal the tank.
4. Critical Tip: Wait 2 full minutes before vaping. This allows e-liquid to fully soak into the coil (priming), preventing dry hits and extending coil life.

Step 3: During vaping the screen shows the battery level and the green surround color light display.

• When you take a draw, the device’s smart screen will display your real-time battery level, paired with a green surround color light to confirm active use.
• This visual feedback lets you track battery status at a glance, so you never run out of power unexpectedly.

Step 4: Child lock

• Locate the switch/button on the bottom of the device.
• Press the button 5 times within 2.5 seconds to turn the child lock function on or off.
• This prevents accidental activation by children, keeping your device safe for household use.

Key Leopard 40K Refillable Highlights

• Refillable Design: Reuse the device by refilling the 10mL tank with your favorite e-liquids.
• Smart Display: Real-time battery tracking with green surround lighting for clear visibility.
• Child Lock: Built-in safety feature to prevent unauthorized use.
• Rechargeable: Type-C port (on the bottom) lets you recharge the battery to finish all e-liquid.