The
Matelix Pro is a premium, highly customizable refillable vape system featuring dual power modes, adjustable airflow, and a smart display. Below is the step-by-step tutorial, ensuring error-free setup and use.
What You’ll Need First
- 1 x Fumot Matelix Pro (unboxed from its protective pouch)
- One 10ml bottle of e-liquid (compatible with refillable pod systems)
Step 1: Remove the device from the pouch.
Initiate your Matelix Pro setup with the foundational unboxing step:
- Locate the sealed, protective pouch that encases the full Matelix Pro device (main body + attached cartridge).
- Open the pouch and remove the entire device assembly to begin the preparation process.
This step ensures the device remains free from dust, debris, and moisture before any handling or assembly.
Step 2: Separate the cartridge from the device, remove the insulating sticker and silicone plug from the cartridge.
This step focuses on prepping the cartridge, with clear distinction between the two protective components—note their different locations as specified in the official guide:
- Grip the Matelix Pro’s main body firmly, then pull the cartridge (the top pod component) straight upward to separate it completely from the device.
- Locate the insulating sticker (a thin, protective label) on the base of the cartridge (the area that connects to the main device) and peel it off—this deactivates the shipping safety lock for the coil.
- Locate the silicone plug (a soft, protective cap) that covers the cartridge’s mouthpiece (drip tip) (the top opening for vaping) and remove it.
Critical Clarification: The silicone plug removed here is exclusively for the mouthpiece, and the insulating sticker is on the cartridge base. The e-liquid filling hole is not accessed or uncovered in this step.
Step 3: Open the silicone plug, fill the tank with one 10ml bottles of e-liquid, wait 2 minutes, and then start vaping.
- On the side of the cartridge (not the top mouthpiece), locate the small, dedicated silicone plug that covers the e-liquid filling hole. Open the side silicone plug to fully expose the filling port.
- Position the nozzle of your 10ml e-liquid bottle directly over the side filling hole, then carefully inject the e-liquid into the cartridge’s tank. Do not overfill—stop once the e-liquid reaches the tank’s maximum fill line to prevent leaks.
- Close the side silicone plug firmly over the filling hole to create an airtight seal.
- Reattach the fully prepared cartridge to the Matelix Pro’s main device body, pressing down until it clicks securely into place.
Non-Negotiable Tip: Wait 2 full minutes before starting to vape. This critical waiting period allows the e-liquid to fully soak into the cartridge’s coil (coil priming), eliminating the risk of dry hits and extending the coil’s service life.
Vaping Mode: BOOST–ECO
The Matelix Pro is engineered with two distinct power modes to suit different vaping preferences, as outlined in the official guide:
- BOOST Mode (26–40W): Delivers high power output for dense, voluminous clouds and amplified flavor intensity—ideal for cloud chasers.
- ECO Mode (15–25W): Optimizes power usage for extended battery life and smoother, milder draws—perfect for casual daily use.
A key convenience feature: the device automatically remembers the power level you last used in each mode, so you can switch between BOOST and ECO without re-adjusting settings.
Theme
Customize your Matelix Pro’s display with three unique, pre-loaded themes (each with distinct background graphics), as specified in the official manual:
- Normal: A clean, minimalist interface that prioritizes readability of core metrics (power, mode, battery).
- Summer Colorful: A vibrant, dynamic theme with bold color schemes and lively background animations.
- Robot: A playful, space-inspired theme featuring futuristic robot and cosmic graphics.
Each theme cycles through unique background visuals, letting you personalize the device’s appearance to match your style.
Button Operation Instructions
All core functions of the Matelix Pro are controlled via the single side button—follow these exact official operation steps for seamless use:
- 1 click: Wake up the device’s display (activates the screen from sleep mode).
- 2 clicks: Switch between BOOST and ECO vaping modes; the device retains your last power setting for each mode.
- 3 clicks within 2 seconds: Enter power adjustment mode. Each subsequent click increases power by 1W (for rapid fine-tuning); power levels cycle once the maximum is reached.
- 4 clicks within 3 seconds: Cycle through the three display themes (Normal → Summer Colorful → Robot).
- 5 clicks within 3 seconds: Power the device on or off (the primary power control function).
- 10 clicks within 5 seconds: Clear the device’s puff count and reset the initialization display—ideal for tracking fresh usage cycles.
Adjustment of Airflow
Fine-tune your vaping experience with the Matelix Pro’s intuitive airflow adjustment (located on the device’s side):
- Locate the airflow adjustment slider on the side of the Matelix Pro’s main body.
- Slide the control to your desired position:
- Tighter airflow: Concentrates flavor and delivers a more pronounced throat hit.
- Wider airflow: Produces cooler vapor, smoother draws, and larger cloud production.
This customizable airflow pairs perfectly with the BOOST/ECO modes to create a tailored experience for every vaper.
Key Details From the Matelix Pro Product Page
To maximize the performance and lifespan of your Matelix Pro, reference these official product specifications:
- Coil System: Optimized for 0.6Ω mesh coils, which deliver consistent atomization across both BOOST and ECO modes.
- Intelligentes Display: A 0.96-inch high-resolution screen shows real-time data including power level, mode, battery percentage, coil resistance, and puff count.
- Build Quality: A sleek, durable design that balances portability with robust construction, perfect for daily use and on-the-go vaping.
The Fumot Matelix Pro’s precision design is engineered for both performance and convenience. By following these official steps, you’ll ensure leak-free refills, optimal coil performance, and full access to the device’s customizable features.
Whether you’re powering through cloud sessions in BOOST mode or enjoying a relaxed vape in ECO mode, the Matelix Pro delivers a polished, personalized experience—when used exactly as outlined in the official guide.
Über Fumot Tech
Shenzhen Fumot Technology Co., Ltd ist auf die Produktion, Forschung und den Verkauf von Einweg-Vape-Geräten und maßgeschneiderter Hardware für elektronische Zigaretten spezialisiert. Im letzten Jahrzehnt hat Fumot mehrere Vape-Marken eingeführt, darunterFumot,SupblissUndVomedie Bewunderung einer riesigen Verbraucherbasis.
Wir sind stolz darauf, wegweisende Hardwaredesigns zu erhalten und die köstlichsten Geschmacksrichtungen in unsere Geräte zu infundieren. Mit unseren beeindruckenden Forschungs- und Entwicklungs-, Fertigungs- und Marketingfähigkeiten haben unsere Produkte wichtige Märkte erreicht, darunter Nordamerika, Südostasien, Großbritannien, Europa und Russland. Unsere Mission ist es, den Kunden die besten Einweg -Vape -Geräte zu bieten!
Teilen Sie Ihre Vaping -Geschichte unbedingt und markieren Sie uns in den sozialen Medien mit den Tags #fumot_official, #fumotvape, #supblissvape oder #Vomevape.
Folgen Sie uns weiterFacebook,Instagram,YouTubeUndX..
