How to Use Fumot Big Puff | 0+10 & 2+10 Version Tutorial
The Big Puff is a modular pod system that lets you enjoy a full 10ml of e-liquid with a 2ml pod (2+10 version) or use a zero-milliliter empty pod (0+10 version) for maximum flexibility. Both versions share the same core design but have slightly different setup steps. Below is the official guide for both variants, based on the product manual screenshots.
What You’ll Need
- 1 x Fumot Big Puff battery device
- 1 x Big Puff pod (0ml empty pod or 2ml pre-filled pod, depending on your version)
- 1 x 10ml Big Puff e-liquid bottle (included in the kit)
Part 1: How to Use the Big Puff (0+10 Version)
This version uses an empty 0ml pod, which you fill directly from the 10ml e-liquid bottle. The setup is quick and requires just 4 steps.
Step 1
Remove the device, remove the sticker and the silicone sealing plug, then open the liquid bottle cap by pressing it down and turning it to the right at the same time.
Step 2
Insert the liquid bottle into the pod from below and turn it to the right until it clicks into place.
Step 3
Insert the assembled pod and liquid bottle into the battery device. When inserting the cartridge (pod) into the device for the first time, more force is required to press the lower piston into place.
Step 4
Child Lock: To unlock, take 3 quick draws within 2 seconds.
Note: The empty pod (0ml) + 10ml liquid can only be used once.
Part 2: How to Use the Big Puff (2+10 Version)
This version uses a 2ml pod, which you top up with the 10ml e-liquid bottle. The setup has a few extra steps to prepare the pod and bottle.
Step 1
Remove the battery, 2ml pod and 10ml e-liquid bottle from the candy bag.
Step 2
Remove the silicone plug from both the top and bottom of the 2ml pod.
Step 3
Remove the silicone caps from the 10ml e-liquid bottle.
Step 4
Align the 2ml pod to the 10ml bottle, ensuring the bottle’s flat side is oriented inward.
Step 5
Align the notch on the 2ml pod with the tab on the 10ml bottle and rotate it clockwise to lock.
Step 6
Press down on the top of the pod and insert the 2ml pod and 10ml bottle assembly into the battery device.
Child Lock (Same as 0+10 Version)
To unlock, take 3 quick draws within 2 seconds. The LED screen on the device will show a lock icon when locked.
Pro Tips for Both Versions
- Priming: After filling, let the pod sit for 2 minutes before vaping to ensure the coil is fully saturated.
- Battery: The Big Puff’s LED display shows real-time battery level. Use the Type-C port on the bottom to recharge.
- Safety: Keep the device and e-liquid out of reach of children. The child lock function prevents accidental activation.
For more details, visit the official Fumot Big Puff product page.
